WIPERS

Artic Seals designs, develops and manufactures a range of Hydraulic and Pneumatic Wipers for cylinders, actuators with linear and rotary movements. The primary function of a wiper seal is to prevent contaminants such as dust, dirt or moisture from entering the system as the rod retracts back in to the cylinder. Contamination is one of the greatest risks to hydraulic and pneumatic systems as contaminants can compromise the fluid or air resulting in decreased performance and efficiency and at worst case contaminants can cause seal failure, leakage and hardware damage. The wiper also creates a static seal against atmosphere and in some cases can control oil flow and pressure build up within the sealing system.

Artic offers a wide range of Wiper Seals incorporating special and standard features in materials including TPU, TPE, PTFE, NBR, High-Performance Engineered Plastics and Metals.

Our Ref Application Temperature Pressure Bar Speed m/s Material
Image for WIPERS TRD Hydraulic-30?C to +120?C<15 m/sPTFE Bronze
NBR- Nitrile Rubber
Image for WIPERS WSL Hydraulic-35?C to +100?C<1 m/sTPU - Polyurethane
Image for WIPERS WSG Hydraulic-35?C to +100?C<1 m/sTPU - Polyurethane
Steel
Image for WIPERS IWP Hydraulic-35?C to +100?C<0.8 m/sTPU - Polyurethane
Steel
Image for WIPERS DWP Hydraulic-35?C to +100?C<0.8 m/sTPU - Polyurethane
Steel
Image for WIPERS WWS Hydraulic-35?C to 100?C<1 m/sTPU - Polyurethane
Image for WIPERS WAT Hydraulic-35?C to 100?C<1 m/sTPU - Polyurethane
Image for WIPERS WED Hydraulic-35?C to +100?C<20 Bar<1 m/sTPU - Polyurethane
Image for WIPERS WEL Hydraulic-35?C to +100?C<1 m/sTPU - Polyurethane
Image for WIPERS WNM Hydraulic-40?C to +130?C<1 m/sPA with Mos2
Image for WIPERS LWA Pneumatic-40?C to +90?C<1 m/sTPU - Polyurethane
Image for WIPERS BWA Pneumatic-40?C to +90?C<20 Bar<1 m/sTPU - Polyurethane
Image for WIPERS BWS Pneumatic-40?C to +90?C<20 Bar<1 m/sTPU - Polyurethane
Image for WIPERS BWH Pneumatic-40? to +90?C (BWH/N -30?C to +100?C)<20 Bar<1 m/sTPU - Polyurethane
BWH/N - NBR75
Image for WIPERS PIW Pneumatic-40?C to +90?C<20 Bar<1 m/sTPU - Polyurethane
Image for WIPERS R09 Hydraulic-30?C to + 100?C -<1 m/sNBR90 + Steel
Image for WIPERS WDA Hydraulic-35?C to +100?C<50 Bar<1 m/sTPU - Polyurethane
Image for WIPERS WIP Hydraulic-40?C to +90?C<20 Bar<1 m/sTPU - Polyurethane