WIPERS

Artic Seals designs, develops and manufactures a range of Hydraulic and Pneumatic Wipers for cylinders, actuators with linear and rotary movements. The primary function of a wiper seal is to prevent contaminants such as dust, dirt or moisture from entering the system as the rod retracts back in to the cylinder. Contamination is one of the greatest risks to hydraulic and pneumatic systems as contaminants can compromise the fluid or air resulting in decreased performance and efficiency and at worst case contaminants can cause seal failure, leakage and hardware damage. The wiper also creates a static seal against atmosphere and in some cases can control oil flow and pressure build up within the sealing system.



Artic offers a wide range of Wiper Seals incorporating special and standard features in materials including TPU, TPE, PTFE, NBR, High-Performance Engineered Plastics and Metals.

Our Ref Temperature Pressure Bar Speed m/s Material Application
TRD -30℃ to +120℃<15 m/sPTFE Bronze
NBR- Nitrile Rubber
Hydraulic
WSL -35℃ to +100℃<1 m/sTPU - PolyurethaneHydraulic
WSG -35℃ to +100℃<1 m/sTPU - Polyurethane
Steel
Hydraulic
IWP -35℃ to +100℃<0.8 m/sTPU - Polyurethane
Steel
Hydraulic
DWP -35℃ to +100℃<0.8 m/sTPU - Polyurethane
Steel
Hydraulic
WWS -35℃ to 100℃<1 m/sTPU - PolyurethaneHydraulic
WAT -35℃ to 100℃<1 m/sTPU - PolyurethaneHydraulic
WED -35℃ to +100℃<20 Bar<1 m/sTPU - PolyurethaneHydraulic
WEL -35℃ to +100℃<1 m/sTPU - PolyurethaneHydraulic
WNM -40℃ to +130℃<1 m/sPA with Mos2Hydraulic
LWA -40℃ to +90℃<1 m/sTPU - PolyurethanePneumatic
BWA -40℃ to +90℃<20 Bar<1 m/sTPU - PolyurethanePneumatic
BWS -40℃ to +90℃<20 Bar<1 m/sTPU - PolyurethanePneumatic
BWH -40? to +90℃ (BWH/N -30℃ to +100℃)<20 Bar<1 m/sTPU - Polyurethane
BWH/N - NBR75
Pneumatic
PIW -40℃ to +90℃<20 Bar<1 m/sTPU - PolyurethanePneumatic
R09 -30℃ to + 100℃ -<1 m/sNBR90 + SteelHydraulic
WDA -35℃ to +100℃<50 Bar<1 m/sTPU - PolyurethaneHydraulic
WIP -40℃ to +90℃<20 Bar<1 m/sTPU - PolyurethaneHydraulic